The
6M44 is a high power, high output, 6.5" midrange for high level
professional use.The excellent sound quality has been achieved as a
result of extensive research on mid frequencies intelligibility. The
6M44 has been designed for use as a midrange in both horn and direct
radiation, closer or reflex enclosures, as small as 3 lt. The high
damping pulp cone, has been designed to achieve the best possible
linearity within itsfrequency range. The in-house developed
cone treatment is a humidity repellent and also dampens the bell mode
resonance significantly. The 44 mm CCAW voice coil assembly is wound on a
strong fiberglas former to improve force transmission and power
handling. The powerful magnet assembly assures high flux concentration.
The force factor and power handling are at an optimum level with
improved thermal connection and heat dissipation, further increasing
power handling and lowering power compression. The demodulating ring
technology reduces inductance and improves transient response and phase
control in the mid frequencies.DATENBLATT
The 6ND410 is a very high output, state-of-the-art midrange product for
high quality professional use. The high level of sound quality has been
achieved thanks to extensive research by Eighteen Sound engineers which
focused on implementing mid frequencies intelligibility. The 6ND410 can
be used as a midrange in both horn and direct radiation, closed or
reflex enclosures, as small as 2 liters. The extremely powerful external
neodymium magnet assembly assures high flux concentration, low power
compression and excellent heat exchange. Consequently, the levels of
force factor and power handling are at a top professional level with an
optimum power to weight ratio. A consistent heat transfer is guaranteed
by the encapsulation of the magnetic structure in the interior of the
basket, offering a large contact space between the back plate and the
dissipating structure. The curvilinear cone-surround, has been created
using computer aided vibrational modelling software to move all
undesired bell modes out of the usable frequency range. The 45 mm
edge-wound voice coil assembly and terminals have been designed to
minimise the moving mass while reinforcing force transmission. The 3
threaded back plate holes give the final user the opportunity to insert
an external customised heat sink, if further heat dissipation is
required. A proprietary humidity-block cone treatment makes the
transducer suitable for outdoor use in adverse weather conditions. In
addition, a special coating applied to both the top and back plates
makes the 6ND410 far more resistant to the corrosive effects of salts
and oxidization.DATENBLATT
The 6ND410 is a very high output, state-of-the-art midrange product for
high quality professional use. The high level of sound quality has been
achieved thanks to extensive research by Eighteen Sound engineers which
focused on implementing mid frequencies intelligibility. The 6ND410 can
be used as a midrange in both horn and direct radiation, closed or
reflex enclosures, as small as 2 liters. The extremely powerful external
neodymium magnet assembly assures high flux concentration, low power
compression and excellent heat exchange. Consequently, the levels of
force factor and power handling are at a top professional level with an
optimum power to weight ratio. A consistent heat transfer is guaranteed
by the encapsulation of the magnetic structure in the interior of the
basket, offering a large contact space between the back plate and the
dissipating structure. The curvilinear cone-surround, has been created
using computer aided vibrational modelling software to move all
undesired bell modes out of the usable frequency range. The 45 mm
edge-wound voice coil assembly and terminals have been designed to
minimise the moving mass while reinforcing force transmission. The 3
threaded back plate holes give the final user the opportunity to insert
an external customised heat sink, if further heat dissipation is
required. A proprietary humidity-block cone treatment makes the
transducer suitable for outdoor use in adverse weather conditions. In
addition, a special coating applied to both the top and back plates
makes the 6ND410 far more resistant to the corrosive effects of salts
and oxidization.DATENBLATT
The 6ND430 is a 6 inch neodymium woofer designed for low frequency
reproduction in 2-way systems or multiway systems where both low weight
and high intelligibility are required. The speaker has been
specifically designed for compact reflex enclosures where high quality
low-bass and mid frequencies are required such as studio monitoring
applications. It is also currently used in line array or multiway
systems with excellent results. The extremely powerful external
neodymium magnet assembly assures high flux concentration, low power
compression and excellent heat exchange. The levels of force factor and
power handling are, as a consequence, at a top professional level with
an optimum power to weight ratio. A consistent heat transfer is
guaranteed by the encapsulation of the magnetic structure in the
interior of the basket, offering a large contact space between the back
plate and the dissipating structure. Particular effort was given to the
surround shape and material design in order to minimise the resonances
on mid range frequencies. The new design, realised with specified rubber
based material density, offers a consistent dampening to typical bell
modes. The 45 mm voice coil is made from a light-weight aluminum wire
and assures linearity and high power handling. A proprietary
humidity-block cone treatment makes the transducer suitable for outdoor
use in adverse weather conditions. In addition, a special coating
applied to both the top and back plates makes the 6ND430 far more
resistant to the corrosive effects of salts and oxidization.DATENBLATT
The 6ND430 is a 6 inch neodymium woofer designed for low frequency
reproduction in 2-way systems or multiway systems where both low weight
and high intelligibility are required. The speaker has been
specifically designed for compact reflex enclosures where high quality
low-bass and mid frequencies are required such as studio monitoring
applications. It is also currently used in line array or multiway
systems with excellent results. The extremely powerful external
neodymium magnet assembly assures high flux concentration, low power
compression and excellent heat exchange. The levels of force factor and
power handling are, as a consequence, at a top professional level with
an optimum power to weight ratio. A consistent heat transfer is
guaranteed by the encapsulation of the magnetic structure in the
interior of the basket, offering a large contact space between the back
plate and the dissipating structure. Particular effort was given to the
surround shape and material design in order to minimise the resonances
on mid range frequencies. The new design, realised with specified rubber
based material density, offers a consistent dampening to typical bell
modes. The 45 mm voice coil is made from a light-weight aluminum wire
and assures linearity and high power handling. A proprietary
humidity-block cone treatment makes the transducer suitable for outdoor
use in adverse weather conditions. In addition, a special coating
applied to both the top and back plates makes the 6ND430 far more
resistant to the corrosive effects of salts and oxidization.DATENBLATT
The 6ND430 is a 6 inch neodymium woofer designed for low frequency
reproduction in 2-way systems or multiway systems where both low weight
and high intelligibility are required. The speaker has been
specifically designed for compact reflex enclosures where high quality
low-bass and mid frequencies are required such as studio monitoring
applications. It is also currently used in line array or multiway
systems with excellent results. The extremely powerful external
neodymium magnet assembly assures high flux concentration, low power
compression and excellent heat exchange. The levels of force factor and
power handling are, as a consequence, at a top professional level with
an optimum power to weight ratio. A consistent heat transfer is
guaranteed by the encapsulation of the magnetic structure in the
interior of the basket, offering a large contact space between the back
plate and the dissipating structure. Particular effort was given to the
surround shape and material design in order to minimise the resonances
on mid range frequencies. The new design, realised with specified rubber
based material density, offers a consistent dampening to typical bell
modes. The 45 mm voice coil is made from a light-weight aluminum wire
and assures linearity and high power handling. A proprietary
humidity-block cone treatment makes the transducer suitable for outdoor
use in adverse weather conditions. In addition, a special coating
applied to both the top and back plates makes the 6ND430 far more
resistant to the corrosive effects of salts and oxidization.DATENBLATT
The 6NMB420 is a 44mm voice coil 6.5 inch neodymium midbass transducer
designed for mid low frequency reproduction in system designs where high
intelligibility is required.
When compared to our 6ND410 state-of-the-art midrange transducer,
6NMB420 offers a lower frequency resonance and a longer linear Xmax
value. As a result the speaker shows an increased output around 250Hz,
with a consequent slightly reduced output above 700Hz.
It is suitable as mid-bass in line array systems or multiple way systems
with high-pass crossover above 200 Hz and low-pass up to 3kHz;
enclosure might be closed or vented with volume size starting from 2
lit.
The speaker offers a superb linearity: distortion values are furtherly
minimized by new enhanced design criterias, developed by Eighteen Sound
engineers, taking the 6NMB420 to very high level of performance.
The extremely powerful external neodymium magnet assembly assures high
flux concentration, low power compression and excellent heat exchange.
The levels of force factor and power handling are, as a consequence, at
the upper professional level with best power to weight ratio.
A consistent heat transfer is guaranteed by the encapsulation of the
magnetic structure in the interior of the basket, offering a
largecontact space between the back plate and the dissipating structure.
Particular efforts were dedicated to the surround shape and material
design in order to minimize the resonances on mid range frequencies. The
triple roll design offers a consistent damping to typical bell modes.
The 44 mm voice coil is made of light-weight aluminum wire and assures linearity and high power handling.
The ability to perform in humid environments is a key feature of the
6NMB420: this is achieved through a proprietary humidity repellent cone
treatmentDATENBLATT
The 6NMB420 is a 44mm voice coil 6.5 inch neodymium midbass transducer
designed for mid low frequency reproduction in system designs where high
intelligibility is required.
When compared to our 6ND410 state-of-the-art midrange transducer,
6NMB420 offers a lower frequency resonance and a longer linear Xmax
value. As a result the speaker shows an increased output around 250Hz,
with a consequent slightly reduced output above 700Hz.
It is suitable as mid-bass in line array systems or multiple way systems
with high-pass crossover above 200 Hz and low-pass up to 3kHz;
enclosure might be closed or vented with volume size starting from 2
lit.
The speaker offers a superb linearity: distortion values are furtherly
minimized by new enhanced design criterias, developed by Eighteen Sound
engineers, taking the 6NMB420 to very high level of performance.
The extremely powerful external neodymium magnet assembly assures high
flux concentration, low power compression and excellent heat exchange.
The levels of force factor and power handling are, as a consequence, at
the upper professional level with best power to weight ratio.
A consistent heat transfer is guaranteed by the encapsulation of the
magnetic structure in the interior of the basket, offering a
largecontact space between the back plate and the dissipating structure.
Particular efforts were dedicated to the surround shape and material
design in order to minimize the resonances on mid range frequencies. The
triple roll design offers a consistent damping to typical bell modes.
The 44 mm voice coil is made of light-weight aluminum wire and assures linearity and high power handling.
The ability to perform in humid environments is a key feature of the
6NMB420: this is achieved through a proprietary humidity repellent cone
treatmentDATENBLATT
The 6NMB900 is the evolution of the 6NMB420 neodymium midbass speaker.
This new 6.5 inch neodymium midbass transducer has been designed for mid
low frequency reproduction in system designs where high intelligibility
is required. 6NMB900 is suitable as mid-bass in line array systems or
multiple way systems with high-pass crossover above 200 Hz and low-pass
up to 3kHz; enclosure might be closed or vented with volume size
starting from 2 lit.
The speaker offers a superb linearity: distortion values are further
minimized by new enhanced design criterias, taking the 6NMB900 to very
high level of performance.
The extremely powerful external neodymium magnet assembly assures high
flux concentration, low power compression and excellent heat exchange.
The levels of force factor and power handling are, as a consequence, at
the upper professional level with best power to weight ratio.
A consistent heat transfer is guaranteed by the encapsulation of the
magnetic structure in the interior of the basket, offering a large
contact space between the back plate and the dissipating structure.
Particular efforts were dedicated to the new surround shape and material
design, in order to minimize the resonances on mid range frequencies.
The new multiroll design offers a consistent damping to typical bell
modes.
The 44 mm voice coil is made of light-weight aluminum wire and assures linearity and high power handling.
The ability to perform in humid environments is a key feature of the
6NMB900: this is achieved through a proprietary humidity repellent cone
treatment.DATENBLATT
The 6NMB900 is the evolution of the 6NMB420 neodymium midbass speaker.
This new 6.5 inch neodymium midbass transducer has been designed for mid
low frequency reproduction in system designs where high intelligibility
is required. 6NMB900 is suitable as mid-bass in line array systems or
multiple way systems with high-pass crossover above 200 Hz and low-pass
up to 3kHz; enclosure might be closed or vented with volume size
starting from 2 lit.
The speaker offers a superb linearity: distortion values are further
minimized by new enhanced design criterias, taking the 6NMB900 to very
high level of performance.
The extremely powerful external neodymium magnet assembly assures high
flux concentration, low power compression and excellent heat exchange.
The levels of force factor and power handling are, as a consequence, at
the upper professional level with best power to weight ratio.
A consistent heat transfer is guaranteed by the encapsulation of the
magnetic structure in the interior of the basket, offering a large
contact space between the back plate and the dissipating structure.
Particular efforts were dedicated to the new surround shape and material
design, in order to minimize the resonances on mid range frequencies.
The new multiroll design offers a consistent damping to typical bell
modes.
The 44 mm voice coil is made of light-weight aluminum wire and assures linearity and high power handling.
The ability to perform in humid environments is a key feature of the
6NMB900: this is achieved through a proprietary humidity repellent cone
treatment.DATENBLATT
The 6NTLW2000 represents the latest 18sound technology for high quality,
low distortion applications. The smallest dual gap motor structure of
the family uses the same concept to maximize its benefits in terms of
thermal dissipation and Bl symmetry to a wide frequency band, making the
6NTLW2000 the perfect component both as a woofer and a midbass.Dual
gap motors linearize inductance and the perfect balance we reached
between the motor and the ultra linear suspension allows both very high
excursion and extreme precision in the mid band with the lowest
intermodulation distortion in the professional market.This features,
together with its extreme low weight make the 6NTLW2000 the perfect
component for highest quality line arrays and multi-way systems. DATENBLATT
The 6NTLW2000 represents the latest 18sound technology for high quality,
low distortion applications. The smallest dual gap motor structure of
the family uses the same concept to maximize its benefits in terms of
thermal dissipation and Bl symmetry to a wide frequency band, making the
6NTLW2000 the perfect component both as a woofer and a midbass.Dual
gap motors linearize inductance and the perfect balance we reached
between the motor and the ultra linear suspension allows both very high
excursion and extreme precision in the mid band with the lowest
intermodulation distortion in the professional market.This features,
together with its extreme low weight make the 6NTLW2000 the perfect
component for highest quality line arrays and multi-way systems. DATENBLATT