Anzahl | Stückpreis |
---|---|
Bis 2 |
670,00 €*
|
Bis 4 |
664,00 €*
|
Bis 6 |
658,00 €*
|
Ab 7 |
652,00 €*
|
Versandfertig in 2 Tagen, Lieferzeit 2-5 Arbeitstage
Produktnummer:
SW10035
Produktinformationen "Eighteensound 18NLW9601 8 Ohm"
The 18NLW9601 is an extended low frequency 18 inch neodymium high
performance transducer. It is the evolution of the industry standard
18NLW9600. The loudspeaker has been designed for use as a subwoofer
component, in either a reflex, bandpass or horn loaded high SPL
demanding applications. For optimum results recommended amplifier should
be able to deliver 3600 Watt program power. At the heart of teh
transducer stands a double silicon spider based on DSS technology let
the 18NLW9601 being able to control the moving mass with high linearity,
showing an exceptional stability of mechanical parameter values in the
long term. The state-of-the-art 5,3" diameter ISV copper clad aluminum
wire CCAW voice coil shows a inside-outside split winding, four layers
design, enabling the 18NLW9601 to handle up to 3600W program power. Bl
force factor, as well as all other electro-dynamic parameters, are
linear within the working range. This, together with the exceptional
high excursion behavior - 70mm before damage, ±14mm linear Xmax - makes
the 18NLW9601 an extremely low distortion, highly dynamic transducer.
The already low distortion and sound quality have been further improved
by the aluminum demodulating ring (SDR technology), that flatten
impedance and phase versus frequency. The 18NLW9601 has been developed
after intense FEA and fluidodynamics simulation and testing, focusing on
dissipating the heat generated by the powerful voice coil. Special
attention was given to the optimization of air flow into the gap without
introducing audible noise. A low-density foam diffractor placed into
the vent hole acts as a cooling system, increasing the power handling
capability and lowering the power compression figure. The carbon fiber
reinforced, straight ribbed cone shows a proprietary resin treatment for
extra pulp strength and water repellent properties. A special coating
applied to both the top and back plates makes the transducer far more
resistant to the corrosive effects of salts and oxidization.
Coaxial: | NEIN |
---|---|
Größe: | 18" |
Impedanz: | 8 Ohm |
Magnet: | Neodym |
Qts: | 0,26 - 0,30 |
Sperrgut: | NEIN |
X-MAX: | 10,1 - 15,0 mm |
Anmelden