Anzahl | Stückpreis |
---|---|
Bis 2 |
225,00 €*
|
Bis 4 |
223,00 €*
|
Bis 6 |
221,00 €*
|
Ab 7 |
219,00 €*
|
Versandfertig in 2 Tagen, Lieferzeit 2-5 Arbeitstage
Produktnummer:
SW10196
Produktinformationen "Eighteensound 10MB600 8 Ohm"
The 10MB600 mid-bass transducer represents a development of the 10M600
midrange, combining excellent linearity with high efficiency and high
power handling capabilities. The 10MB600 is primarily intended for use
as a midbass driver in extremely compact 2-way reflex enclosures between
10 and 40 lt. Its curvilinear paper cone is formed using a special high
strength wood pulp, designed to achieve the best possible rigidity and
stiffness. An exclusive treatment is also applied to the cone to
increase its water repellent properties. The 75 mm state-of-the-art
voice coil is similar to those fitted to our top-of-the-range 18" and
15" models but it is wound with aluminum wire. The coil also employs our
Interleaved Sandwich Voice coil (ISV) technology. A high strength
fiberglas former carries windings on both the outer and inner surfaces
to achieve a mass balanced coil, resulting in an extremely linear motor
assembly with a reduced tendency for eccentric behavior when driven
hard. The voice coil cooling is achieved using airways between the
chassis back plate and the face plate of the magnet which allow heated
air from the voice coil and gap to be channeled away and dissipated by
the chassis basket. This technology is a result of 3D CAD resource
application by our engineers. The top and back plates of the magnet
assembly have been designed to optimise flux density and BL factor in
the air gap also using our in-house FEA CAD facility. In addition, a
special treatment is applied to the top and back plates making the
transducer far more resistant to the corrosive effects of salts and
oxidization. Hence, the equipment is able to perform outdoors in
inclement weather conditions.
Coaxial: | NEIN |
---|---|
Größe: | 10" |
Impedanz: | 8 Ohm |
Magnet: | Ferrit |
Qts: | 0,21 - 0,25 |
Sperrgut: | NEIN |
X-MAX: | 5,1 - 10,0 mm |
Anmelden